Right Angle 3" Orbital Sander manufacturer: Low Profile Angle Heavy Duty : Right Angle 3" Orbital Sander wholesaler and manufacturer, ISO Certified, CE bookmarked

 
 

catalog Search Catalog


Search Catalog








 

 

MPT-58230 Low Profile Angle Heavy Duty Right Angle 3" Orbital Sander

 
 
MPT-58230
Low Profile Angle Heavy Duty Right Angle 3" Orbital Sander

Case Qty: N/Apc(s)/per case
Free Speed: 11000 RPM

Become An Authorized Distributor
 


Order Online Now

Low Profile Angle Heavy Duty Right Angle 3 inch Orbital Sander
 
 
 

Introduction

58230 Low Profile Angle Heavy Duty Series 3” Right Angle Orbital Sander
- Free Speed:16500rpm
- Optional Muffler MSA-005A

 

Product Features

Low Profile Angle Design 0. 4cm) Low profile angle height design avoid the impossibility for tasks located at the corner area. The random orbit is produced through simultaneously spinning sanding disk and moving it in an ellipse, ensuring that no single part of the abrasive material travels the same path twice. MSA-K083Low Profile Angle Palm Mini Series 2” Right Angle Orbital Sander Kit Set. MSA-50121 Sticker Sanding Pads MSA-50122 Velcro Sanding Pads Various Grits Sanding Pads used to scrub and sand off rough surface for better painting MAS-50122 High Quality Wool Pad After painting, apply surface rough wax and polish with wool polishing po. Velcro It works on the principle that enough hooks on one side of fastener would become tangled in enough loops on the other side to form very strong bond. Applying pressure to section of Velcro can only make it stronger as more loops and hooks con

 

Specification

Pad Size: 3xM6 " 76.2xM6 mm
Orbital Size: 0.12 " 3 mm
Noise Rating 85 dBA
Horse Power: 0.3 hp 0.22kw
Air Pressure: 90 psi 6.21 bar
Free Speed: 11000 RPM
Hose Size: 1/4 " 6.35 mm
Tool Length: 7.2 " 183 mm
Total Angle Height: " mm
Angle Height Above Collect: 0.94 " 24 mm
Exhaust: Rear
Weight: 1.54 lb 0.7 kg
  • *real product might look different from product images.
  • *specifications are subject to change without further notice.
  • *You may request customization on tool specification and appearance.
  • *Master reserves all rights for any change requested.
  • *Please confirm all specification and product with your Master sales representative.